求助,仿真时出问题不知什么问题

andyqianqian · 发表于 2010-1-11 08:42:20

本帖最后由 andyqianqian 于 2010-1-11 08:52 编辑

大家先谅解下,我把我要发的内容一起发不出去,只能一次一次发.:L

andyqianqian · 发表于 2010-1-11 08:43:37

搭建以来一直点到运行模式,运行仿真时报错.
搭建的有:一个油源特性,一个流量源(开端,Q单出),一个液压容器(中间,CH那个),一个零流量源(最后,盲堵).
什么原因啊,各位.帮帮忙......

andyqianqian · 发表于 2010-1-11 08:44:25

lc_checkout failed with -5 - retrying after a short sleep try no:0
lc_checkout failed with -5 - retrying after a short sleep try no:1
lc_checkout failed with -5 - retrying after a short sleep try no:2
lc_checkout failed with -5 - retrying after a short sleep try no:3
lc_checkout failed with -5 - retrying after a short sleep try no:4
lc_checkout failed with -5 - retrying after a short sleep try no:5
lc_checkout failed with -5 - retrying after a short sleep try no:6
lc_checkout failed with -5 - retrying after a short sleep try no:7
lc_checkout failed with -5 - retrying after a short sleep try no:8
lc_checkout failed with -5 - retrying after a short sleep try no:9
lc_checkout failed with -5 - retrying after a short sleep try no:10
Checkout failed: No such feature exists.

andyqianqian · 发表于 2010-1-11 08:45:20

Feature: hydraulic
License path: D:\AMEsim7\/licensing/license.dat
FLEXnet Licensing error:-5,357

andyqianqian · 发表于 2010-1-11 08:48:13

For further information, refer to the FLEXnet Licensing End User Guide,
available at MACAROVISION

andyqianqian · 发表于 2010-1-11 08:48:32

AMESim model D:/11235_ did an abnormal exit!

andyqianqian · 发表于 2010-1-11 08:50:13

总算发完了,不知道什么问题,我把上面的内容一起发老是发不出去.郁闷啊.请大家谅解下.什么原因啊.帮帮忙啊.万分感谢.

sunbang · 发表于 2010-1-11 19:02:45

哈哈，我前面也遇到了此问题，是LICENSE的问题，没有安装好。前面我已经提过问题了，有位兄台给我发了安装文件，你在论坛上找一下就能找到了。

andyqianqian · 发表于 2010-1-12 19:22:58

本帖最后由 andyqianqian 于 2010-1-13 15:38 编辑

万分感激啊.

joopl2007 · 发表于 2010-3-26 09:36:22

我也出现了同样的问题啊，请问楼主有没有解决，找到安装能否共享一下？

账号		自动登录	找回密码
密码			立即注册