美国国家流体协会(NFPA) 标准列表

液鳍测试

美国国家流体协会(NFPA) 标准列表

实话说，这个NFPA的标准确实特别多，也很复杂，不过有用的也就那么几个{:9_230:}

关于测试的标准两只手就能数的过来。

对于测试最重要的，是NFPA T2.6.1, 关于液压零部件疲劳测试的技术要求（个人理解哈），

还有几个相关联的，也值得看看。

有时间专门开个帖子聊一下这几个标准。

有些标准号已经旧了，比如NFPA T2.6.1 ,没记错的话应该是R2000了，

这里面写的还是R1991,所以还是需要仔细甄别一下的。

ANSI/(NFPA)T2.12.1 R1-2002, Hydraulic fluidpower – Systems and products – Method of measuring average steady-state pressure (to be used inconjunction with ANSI/(NFPA)T2.12.10)   

NFPA/T2.12.5 R1-2004, Information report –Fluid power – Laboratory guidelines (second edition)   

NFPA/T3.10.10, Proposed NFPA recommendedstandard glossary of contamination terms for hydraulic fluid power   

NFPA/T3.10.11, Proposed MIL SPEC (andproposed NFPA and USA standards) Filter assembly, Oil, Hydraulic, Lowpressure   

NFPA/T3.10.13, Proposed NFPA list oftechnical organizations that have published papers concerning fluid powerfilters and separators and contamination  

NFPA/T3.10.15, Proposed NFPA recommendedstandard multi-pass method for evaluating the filtration performance of acoarse hydraulic fluid power filter element  

NFPA/T3.10.16M, Hydraulic fluid power –Filters – Statement of requirements   

NFPA/T3.10.19M, Hydraulic fluid power –Filter water absorbent element – Performance test   

NFPA/T3.10.3-1967 (R1980), Glossary ofterms for hydraulic fluid power filters and separators   

NFPA/T3.12.2.4, Proposed NFPA recommendedstandard port identification and dimensional identification code for fluidpower air line filters

NFPA/T3.5.29 R1-2003, Fluid power systemsand components – Electrically-controlled industrial valves – Interfacedimensions for electrical connectors   

NFPA/T1.4.2 R4-2000, Style Guide for thePresentation of NFPA Recommended Standards, Practices, Information Reports andBibliographies  

NFPA/T1.4.5 R4-2000, Technical CommitteeHandbook   

NFPA/T2.12.11-1-2001, Fluid power systemsand components – Reliability analysis, reporting format and databasecompilation   

NFPA/T2.12.11-2-2007, Hydraulic fluid powercomponents – Assessment of reliability by testing   

NFPA/T2.12.2-2002, Hydraulic fluid power –Systems and products – Method of reporting traceability of measurements   

NFPA/T2.13.13-2002, Recommended practice –Hydraulic fluid power – Fluids – Viscosity selection criteria for hydraulicmotors and pumps   

NFPA/T2.13.3 R3-2004 (R2005), Informationreport – Bibliography – Hydraulic fluid power – Non-proprietary hydraulic fluidspecifications and selected recommended practice (fourth edition)   NFPA/T2.24.1 R1-2000 (R2005), Hydraulicfluid power – Systems standard for stationary industrial machinery – Supplementto ISO 4413:1998 – Hydraulic fluid power – General rules relating tosystems   

NFPA/T2.30.4 R1-2002, Recommended practice– Fluid power systems – Application guidelines for selection of fluid powerposition transducers   

NFPA/T2.30.6-2002, Hydraulic fluid power –Electrical connectors for use with industrial hydraulic integrated proportionalvalves – Dimensions and requirements  

NFPA/T2.9.11 R1-1999 (R2004), Hydraulicfluid power – Method for determining the particulate count of an oil samplefrom a system (using liquid automatic counters)   

NFPA/T2.9.16-1995 (R2002), Informationreport – Hydraulic fluid power – Determination of particulate contaminant levelusing automatic optical particle counters

液鳍测试

NFPA/T3.10.3 R1-2007, Hydraulic fluid power - Filters and separators - Glossary - Supplement to ISO 5598:1985 - Fluid power systems and components - Vocabulary  

NFPA/T3.10.4 R1-1990, Hydraulic fluid power – Filters and separators – Graphic symbols supplement   NFPA/T3.10.8.7 R1-1998 (R2004), Hydraulic fluid power – Filter elements – Method for verifying the flow fatigue characteristics   NFPA/T3.12.17-2002, Recommended practice – Pneumatic fluid power – Filters, regulators and lubricators – Application guidelines  

NFPA/T3.12.9 R2-2004 (R2005), Information report – Bibliography – Pneumatic fluid power – Filter, regulator and lubricator (FRL) (third edition)   NFPA/T3.19.22 R2-2004 (R2005), Information report – Bibliography – Hydraulic fluid power – Sealing devices standards   NFPA/T3.19.32-1992, Rotary shaft lip type seals – Part 2: Vocabulary (technically identical to ISO 6194-2:1991)  

NFPA/T3.20.1 R1-1989 (R2004), Fluid power systems – Quick-action couplings – Glossary  

NFPA/T3.20.14-1989 (R2004), Pneumatic quick-action couplings - Plug dimensions  

NFPA/T3.20.15-1990, Hydraulic fluid power – Quick-action coupling – Flush face type  

NFPA/T3.21.18-1994 (R2004), Pneumatic fluid power – Recommended practice for calibration and use of flowmeters

NFPA/T3.5.36M-1990, Hydraulic fluid power - Four port directional control valves - Mounting surfaces with auxiliary ports  

NFPA/T3.5.9-1973, Series of mounting interfaces for 4567 maximum psi (315 bar) four port hydraulic fluid power directional valves  

NFPA/T3.6.1 R1-1983, Proposed NFPA recommended standard - Cylinder bore and piston rod sizes - Inch series  

NFPA/T3.6.17-1971 (R2004), Port nominal pipe sizes for merged inch and metric series cataloged square head industrial pneumatic fluid power cylinders  

NFPA/T3.6.2 R1-1983, Proposed NFPA recommended standard - Dimension identification code for fluid power cylinders  

NFPA/T3.6.29-1976 (R1981), Method for establishing and verifying the fatigue and static pressure ratings of the metal pressure containing envelope of a tie rod or bolted fluid power cylinder  

NFPA/T3.6.29 R1-1996, Tie rod or bolted cylinder pressure rating supplement to

NFPA/T2.6.1 R1-1991, Fluid power systems and products – Method for verifying the fatigue and establishing the burst pressure ratings of the metal pressure containing envelope of a tie rod or bolted cylinder  

NFPA/T3.6.31-1976, Telescopic cylinders and cylinders of non-bolted end construction pressure rating supplement no. 7 to NFPA Recommended Standard for verifying the fatigue and static pressure ratings of the pressure containing envelope of a metal fluid power component  

NFPA/T3.6.34-1979, Proposed NFPA recommended standard - Fluid power systems and components - Cylinder bores and piston rod diameters - Inch series  

NFPA/T3.6.36-1978 (R1984), A bibliography of fluid power cylinder standards

NFPA/T3.6.36 R1-2000, Information report – Bibliography – Fluid power cylinder standards (second edition)   NFPA/T3.6.36 R2-2002, Information report – Bibliography – Fluid power cylinder standards (third edition)

NFPA/T3.6.4-1967(R1992), American National Standard - Bore and rod size combinations and rod end configurations for catalogued square head industrial fluid power cylinders  

NFPA/T3.6.48-1981, Fluid power systems and components - Cylinders - Piston rod thread dimensions and types  

NFPA/T3.6.8 R1-1984, Fluid power systems – Cylinders – Dimensions for accessories for catalogued square head industrial types (second edition)  

NFPA/T3.7.2-1968 (R1992), Graphic symbols for fluidic devices and circuits

NFPA/T3.8.11-1977, A bibliography of fluid power tube fittings and conductors  

NFPA/T3.8.11 R1-2004, Information report – Bibliography – Fluid power – Tube fittings and conductors  

NFPA/T3.8.2 R1-1970, NFPA recommended standard general requirements of separable fluid power tube fittings (T3.8.2-1967)  

NFPA/T3.8.3 R2-1977, Test method for steel separable tube fittings for hydraulic fluid power applications  

NFPA/T3.8.9-1976, NFPA recommended standard qualification test for separable tube fittings for pneumatic fluid power applications  

NFPA/T3.9.12-1970(R1981), NFPA recommended standard method of measuring sound generated by hydraulic fluid power pumps  

NFPA/T3.9.14-1971(R1981), NFPA recommended standard method of measuring sound generated by hydraulic fluid power motors  

NFPA/T3.9.18 R1-1978 (R1994), Method of establishing the flow degradation of fixed displacement hydraulic fluid power pumps when exposed to particulate contaminant  

NFPA/T3.9.20-1991, Hydraulic fluid power – Pumps – Method for testing and presenting basic performance data for pressure compensated pumps

NFPA/T3.9.21 R1-1997, Information report – Bibliography – Hydraulic fluid power – Pump/motor standards  

NFPA/T3.9.22 R1-1995, Pump motor – Pressure rating supplement to NFPA/T2.6.1 R1-1991, Fluid power systems and products – Method for verifying the fatigue and establishing the burst pressure rating of the pressure containing envelope of a metal fluid power pump and motor  

NFPA/T3.9.25-1977 (R1994), Hydraulic fluid power – Motors – Methods of establishing speed degradation (when exposed to particulate contaminant)   

NFPA/T3.9.30-1980, Hydraulic fluid power - Pumps and motors - Geometric displacements

液鳍测试

NFPA/T3.10.3 R1-2007, Hydraulic fluid power - Filters and separators - Glossary - Supplement to ISO 5598:1985 - Fluid power systems and components - Vocabulary     NFPA/T3.10.4 R1-1990, Hydraulic fluid power – Filters and separators – Graphic symbols supplement   NFPA/T3.10.8.7 R1-1998 (R2004), Hydraulic fluid power – Filter elements – Method for verifying the flow fatigue characteristics   NFPA/T3.12.17-2002, Recommended practice – Pneumatic fluid power – Filters, regulators and lubricators – Application guidelines     NFPA/T3.12.9 R2-2004 (R2005), Information report – Bibliography – Pneumatic fluid power – Filter, regulator and lubricator (FRL) (third edition)   NFPA/T3.19.22 R2-2004 (R2005), Information report – Bibliography – Hydraulic fluid power – Sealing devices standards   NFPA/T3.19.32-1992, Rotary shaft lip type seals – Part 2: Vocabulary (technically identical to ISO 6194-2:1991)     NFPA/T3.20.1 R1-1989 (R2004), Fluid power systems – Quick-action couplings – Glossary     NFPA/T3.20.14-1989 (R2004), Pneumatic quick-action couplings - Plug dimensions     NFPA/T3.20.15-1990, Hydraulic fluid power – Quick-action coupling – Flush face type     NFPA/T3.21.18-1994 (R2004), Pneumatic fluid power – Recommended practice for calibration and use of flowmeters    NFPA/T3.5.36M-1990, Hydraulic fluid power - Four port directional control valves - Mounting surfaces with auxiliary ports     NFPA/T3.5.9-1973, Series of mounting interfaces for 4567 maximum psi (315 bar) four port hydraulic fluid power directional valves     NFPA/T3.6.1 R1-1983, Proposed NFPA recommended standard - Cylinder bore and piston rod sizes - Inch series     NFPA/T3.6.17-1971 (R2004), Port nominal pipe sizes for merged inch and metric series cataloged square head industrial pneumatic fluid power cylinders     NFPA/T3.6.2 R1-1983, Proposed NFPA recommended standard - Dimension identification code for fluid power cylinders     NFPA/T3.6.29-1976 (R1981), Method for establishing and verifying the fatigue and static pressure ratings of the metal pressure containing envelope of a tie rod or bolted fluid power cylinder     NFPA/T3.6.29 R1-1996, Tie rod or bolted cylinder pressure rating supplement to   NFPA/T2.6.1 R1-1991, Fluid power systems and products – Method for verifying the fatigue and establishing the burst pressure ratings of the metal pressure containing envelope of a tie rod or bolted cylinder     NFPA/T3.6.31-1976, Telescopic cylinders and cylinders of non-bolted end construction pressure rating supplement no. 7 to NFPA Recommended Standard for verifying the fatigue and static pressure ratings of the pressure containing envelope of a metal fluid power component     NFPA/T3.6.34-1979, Proposed NFPA recommended standard - Fluid power systems and components - Cylinder bores and piston rod diameters - Inch series     NFPA/T3.6.36-1978 (R1984), A bibliography of fluid power cylinder standards    NFPA/T3.6.36 R1-2000, Information report – Bibliography – Fluid power cylinder standards (second edition)   NFPA/T3.6.36 R2-2002, Information report – Bibliography – Fluid power cylinder standards (third edition)   NFPA/T3.6.4-1967(R1992), American National Standard - Bore and rod size combinations and rod end configurations for catalogued square head industrial fluid power cylinders     NFPA/T3.6.48-1981, Fluid power systems and components - Cylinders - Piston rod thread dimensions and types     NFPA/T3.6.8 R1-1984, Fluid power systems – Cylinders – Dimensions for accessories for catalogued square head industrial types (second edition)     NFPA/T3.7.2-1968 (R1992), Graphic symbols for fluidic devices and circuits    NFPA/T3.8.11-1977, A bibliography of fluid power tube fittings and conductors     NFPA/T3.8.11 R1-2004, Information report – Bibliography – Fluid power – Tube fittings and conductors     NFPA/T3.8.2 R1-1970, NFPA recommended standard general requirements of separable fluid power tube fittings (T3.8.2-1967)     NFPA/T3.8.3 R2-1977, Test method for steel separable tube fittings for hydraulic fluid power applications     NFPA/T3.8.9-1976, NFPA recommended standard qualification test for separable tube fittings for pneumatic fluid power applications     NFPA/T3.9.12-1970(R1981), NFPA recommended standard method of measuring sound generated by hydraulic fluid power pumps     NFPA/T3.9.14-1971(R1981), NFPA recommended standard method of measuring sound generated by hydraulic fluid power motors     NFPA/T3.9.18 R1-1978 (R1994), Method of establishing the flow degradation of fixed displacement hydraulic fluid power pumps when exposed to particulate contaminant     NFPA/T3.9.20-1991, Hydraulic fluid power – Pumps – Method for testing and presenting basic performance data for pressure compensated pumps   NFPA/T3.9.21 R1-1997, Information report – Bibliography – Hydraulic fluid power – Pump/motor standards     NFPA/T3.9.22 R1-1995, Pump motor – Pressure rating supplement to NFPA/T2.6.1 R1-1991, Fluid power systems and products – Method for verifying the fatigue and establishing the burst pressure rating of the pressure containing envelope of a metal fluid power pump and motor     NFPA/T3.9.25-1977 (R1994), Hydraulic fluid power – Motors – Methods of establishing speed degradation (when exposed to particulate contaminant)      NFPA/T3.9.30-1980, Hydraulic fluid power - Pumps and motors - Geometric displacements

freonwang

楼主在那儿高就？能加好友吗？我还没权限

fdpump

楼主好厉害   很有追赶潮流的意识