论坛 › AMESim › AMESim软件问题

zhh 发表于 2016-5-28 16:03:49

AMESim软件问题

由子模型模式转换为参数模式时，出现“please assign a tag for remote port”怎么办？？？
急求答案~

yiliya 发表于 2016-5-28 20:57:01

你用了信号库里面的远程无线连接的元件了 你有两种方法 1 把元件删掉 然后用线连接 2 太tag里面设置标签

zhh 发表于 2016-5-29 14:57:36

yiliya 发表于 2016-5-28 20:57
你用了信号库里面的远程无线连接的元件了 你有两种方法 1 把元件删掉 然后用线连接 2 太tag里面设置标签

那你能告诉我哪个是远程无线的元件吗？应该在tag里怎么改呢？我是刚开始用这个软件，都不懂{:10_197:}拜托了

yiliya 发表于 2016-5-30 23:48:20

把远程控制的模块全都给删了 然后把信号直接连接在可变节流口上

zhh 发表于 2016-6-1 10:43:08

yiliya 发表于 2016-5-30 23:48
把远程控制的模块全都给删了 然后把信号直接连接在可变节流口上

哦，我知道了~谢谢你！

zhh 发表于 2016-6-1 10:49:41

yiliya 发表于 2016-5-30 23:48
把远程控制的模块全都给删了 然后把信号直接连接在可变节流口上

那怎么设置在1s时刻发出制动指令啊？

zhh 发表于 2016-6-6 11:46:08

yiliya 发表于 2016-5-28 20:57
你用了信号库里面的远程无线连接的元件了 你有两种方法 1 把元件删掉 然后用线连接 2 太tag里面设置标签

仿真出来一些警告，怎么改啊？{:10_196:}
lc_checkout failed with -5 - retrying after a short sleep try no:0
lc_checkout failed with -5 - retrying after a short sleep try no:1
lc_checkout failed with -5 - retrying after a short sleep try no:2
lc_checkout failed with -5 - retrying after a short sleep try no:3
lc_checkout failed with -5 - retrying after a short sleep try no:4
lc_checkout failed with -5 - retrying after a short sleep try no:5
lc_checkout failed with -5 - retrying after a short sleep try no:6
lc_checkout failed with -5 - retrying after a short sleep try no:7
lc_checkout failed with -5 - retrying after a short sleep try no:8
lc_checkout failed with -5 - retrying after a short sleep try no:9
lc_checkout failed with -5 - retrying after a short sleep try no:10
Checkout failed: No such feature exists.
Feature: pneumatic
License path: C:\AMESim\7.0.0\/licensing/license.dat
FLEXnet Licensing error:-5,357
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
AMESim model C:/newabc_ did an abnormal exit!

查看完整版本: AMESim软件问题