amesim与adams联合仿真的问题
你好，向您请教下，我做的是一个联合仿真的模型amesim与adams的联合仿真，问题是压力大到某个数值，仿真就不能运行了，压力小的时候，是可以运行，因为adams里的机构重力，所以加的液压缸的压力不能足以克服重力。所以我加大压力，但是压力一增大，仿真就出错了，不能哪些参数需要设置。向您请教。No good solution obtained for stabilizing/consistent starting values run.
Warning stabili
zing/consistent starting values run may have been
unsuccessful.
Examine results carefully!
Error detected in DASSL
At t=0 and step size h=2.04013e-310 the Jacobian matrix is r
epeatedly singular
This means th
e equations being solved are badly conditioned.
A system of differential algebraic equations is being solved
and such systems do not al
ways have a solution.
Check the parameters of the submodels.
If you have just added a new submodel, check the code.
Did not complete the solution
AMESim model F:\lianhefangzhenwajuelifuhcha\wajuejijinzhan6_ did an abnormal exit!
您好，请问一下amesim仿真与版本有关系吗？我用的是amesim r10 与adams2010，但是在amesim help文档里推荐用adams 2005版本。请问版本不同怎么解决，谢谢lz 俊伟 发表于 2013-3-22 16:23 static/image/common/back.gif
您好，请问一下amesim仿真与版本有关系吗？我用的是amesim r10 与adams2010，但是在amesim help文档里推荐用 ...
你好啊请问你成功了没有啊？可以交流一下吗？
1617604564 jikai_2008no1 发表于 2013-5-4 10:13 static/image/common/back.gif
你好啊请问你成功了没有啊？可以交流一下吗？
1617604564
你好啊，请问什么版本的adams和r10的amesim可以联合仿真啊
页:
[1]