AMESim与Simulink联合仿真的问题
在仿真中总是中间出现停止：Requesting hydraulic license ...
got the license for hydraulic, continuing
Dissipation number is significant, Dn = 0.00338295.
Consider using f.d.f states for HL041 submodel.
For faster computation, you may also try a HLG0021D submodel.
Warning in HL041 instance 2.
Be careful! the flow area is limited by
(PI/4)*(dspool^2-drod^2) and not by xmax.
Warning in BRP025 instance 1.
Requesting hcd license ...
got the license for hcd, continuing
Warning in OR005 instance 1 (t = 0.000000): Reynolds > 10000
The simulation has been stopped before
the results file exceeds the 2 GigaBytes limit.
To avoid this problem, reduce the number of saved variables
or increase the print interval.
The simulation has been stopped before
the results file exceeds the 2 GigaBytes limit.
To avoid this problem, reduce the number of saved variables
or increase the print interval.
不知道如何解决，望高手指点一二，小弟不胜感激！ 这是因为你存的仿真结果太多了，amesim的上线是2gb.simulation setting里面把print interval改小点，或者选择你不需要知道仿真结果的元件，右键单机，然后选择don't save variable. 你好，你这个出错的地方应该是和你的模型参数设置有关系。你的模型应该是一个带液压系统的模型，错误提醒中提到了雷诺数。你是否方便给我看一下你的具体AMESim模型，这样有助于我给你找到错误的所在。 问题说你需要保存的数据量太大，已经超过了千兆字节，建议你较少需要保存的变量数或者增大记录数据时间间隔。 附图如下，谢谢各位好心人帮忙。 AMESim中的模型压缩文件
页:
[1]